Qualitative differences of boats "KORSAR"

1. A category of operation "C": a wave up to 2m, a wind up to 6 points, removal from coast is not limited.
2. Pressure in cylinders - 250 mbar, the adult person can stand on a cylinder of a boat, not pressing through it.
3. Glue MAXBOND - two componental glue on polyurethane to a basis, polymerization with a surface of a fabric and details of a boat, forms a single whole, strong fastens stuck together surfaces.
4. Material SuperTARP for cylinders - 1100 decitex, weight 1100 g/m (for boats ADMIRAL the fabric in weight 1500 g/m is used), dense weaving of the basic layer of a fabric polyester provides durability and layers PVC put from both parties, by dipping, provide tightness, protection against oils, oil, a ultraviolet and washing. Temperature of use from -35C up to +65C.
5. Material SuperTARP for the bottom - 1100 decitex, weight 1100 g/m (for boats ADMIRAL the fabric in weight 1500 g/m is used), dense weaving of the basic layer of a fabric polyester provides durability, and layers PVC put from both parties, by injection under pressure in structure of the reinforced layer, provide greater protection from washing and abrasive influence. And as protection against oils, oil and an ultraviolet. Temperature of use from -35C up to +65C.
6. Material SuperTARP for sticking seams - 1100 decitex, weight 550 g/m, dense weaving of the basic layer of a fabric polyester provides durability, and special layers PVC put from both parties, provide better polymerization (glueing) surfaces of a seam.. Temperature of use from -35C up to +65C.
7. Seams (a real guarantee of 5 years!) are executed unique threefold prosticky; two elastic special tapes (seam tape) are pasted from within and outside of a seam, polymerizing with the basic fabric at humidity up to 30%, form a single whole. The third tape is pasted overlapped to external. All as a whole does a seam heavy-duty.
8. Transom - fastening transom is reliable. The massive U-shaped structure of the transom holder is pasted in boards of a boat. Swelling boats, being radially curved, it presses and strongly holds planes pasted in it transom boats. That enables to use the motor of greater capacity.
9. Stringer (a longitudinal aluminium structure) - the steel core inside Stringer provides high reliability, interfering with a break at high loadings.
10. The bottom of a boat is strengthened by a plastic structure and additional fabric overlays.
11. The deck-floor  is made on a choice of waterproof plywood, PVC (strong plastic, a guarantee of 5 years) or aluminium. The floor can be inflatable, made of a special double fabric connected thousand strings.